A dirty conference room chair can not only be unsightly, but it also makes the whole room look worn and antiquated.
Some of us spend hours at a time sitting in our conference room chairs, so keeping them clean and fresh is essential.
When it comes to the regular cleaning of your conference room chairs there are certain surfaces that can be cleaned using just an all-purpose cleaner and water while others may require the use of more advanced chemicals or professional help.
- 1 1. How Often Should I Clean My conference room chairs?
- 2 2. Wipe It Down Every so often
- 3 3. Start by removing the seat and back cushions from your conference room chairs
- 4 4. Reach into Every Corner
- 5 5. Use WD-40 If Necessary
- 6 6. Don’t Forget About The Wheels
- 7 7. Clean up With Soap And Water
- 8 8. Get Rid of Odors With Baking Soda
- 9 9. Find Replacement Cushions
1. How Often Should I Clean My conference room chairs?
The first thing you should understand is how often you need to be cleaning your modern conference room chairs. Most professional manufacturers will recommend that you clean this piece of furniture every three months if it’s used on a daily basis.
If that individual who uses the conference room chairs happens to stay in very dusty environments such as construction sites or farms, then they would need to clean their chairs even more frequently than that.
Here are some easy ways that you need to know to keep your conference room chairs looking fresh…
2. Wipe It Down Every so often
You should wipe down your modern conference room chairs with a damp microfiber cloth to remove dust. The easiest way to do this is with a quick rotating action over the surface of your chair.
With a bit of effort, you can also give your chair some basic Windex treatment and wipe down the surface area. You should be sure not to simply spray Windex on your conference room chairs as it could cause damage or discoloration.
3. Start by removing the seat and back cushions from your conference room chairs
The best thing to do is use a lint roller to remove any lingering debris, such as fur or lint that has collected on the surface of the chair.
This will help ensure that you get all of those hard-to-reach areas. You should also take a vacuum to the chair, focusing on grates and vents.
4. Reach into Every Corner
Take your time when cleaning your conference chairs and get in every nook and cranny!
For crevices that are just a little harder to reach, use a toothpick to help you clean them out from the gap between the back of the seat cushion and the actual bottom of your conference chairs. This will ensure that all dirt has been removed so you won’t have pieces breaking off inside of your furniture over time.
You should also ensure that you remove any loose screws or bolts daily to make sure they don’t cause damage while you’re putting everything back together.
5. Use WD-40 If Necessary
If you’ve been using your conference chairs daily and it’s gotten a bit wobbly due to consistent use, then this is an easy fix that won’t cost you anything.
Spray some WD-40 into the wobble of your seat so that it glides smoothly again. This will not only save you money from having to buy a new chair but it will also keep your furniture safe from any damage caused by being unstable or loose!
6. Don’t Forget About The Wheels
For your conference room chairs to look clean, don’t forget about the wheels. Your conference chairs with wheels need to be in good shape for your chair to roll freely and avoid damaging things around your work area.
Simply remove the wheels from your conference chairs one by one and spray them with WD-40 so that they roll smoothly. You should be sure to do this in an open space so that you don’t accidentally spray any other part of your furniture or electronics around where you are working.
7. Clean up With Soap And Water
If things have gotten really out of hand, then it’s time to bust out the big guns!
The easiest way to clean stubborn stains off of your conference chairs is with some water and dish soap. This simple mixture will remove any lingering dirt or gum that has been left behind without causing damage to your fabric.
Start by filling a bowl with warm water and dish soap, mixing them until it forms bubbles.
You should then dip your cloth into the mixture and use it to scrub out any stains that are on your chair. You should only apply the soap in a gentle circular motion rather than a harsh back-and-forth motion.
Once you have finished cleaning up, be sure to rinse the area with warm water and dry it with a clean towel.
8. Get Rid of Odors With Baking Soda
If you’re noticing some unpleasant smells coming from your office furniture, then there’s no need to worry.
All you’ll need is some baking soda and lemon juice to remove any lingering odors from your conference room chairs. Simply pour some baking soda on a plate and add some lemon juice until it forms a paste.
Afterward, scrub the mixture onto your chair and let it rest for about 10 minutes. After you have let the paste sit, wipe it off with a wet cloth and scrub again with warm water.
Once you’re done cleaning up, be sure to dry your conference room chairs thoroughly by blotting them down with a clean towel.
9. Find Replacement Cushions
If you can’t find replacement cushions for your office conference chair or if they aren’t in good enough condition anymore, then there is another solution that works just as well.
You should purchase some felt furniture pads so that you can protect your floors from any damage caused by wheels. These will also provide an extra layer of cushioning so that people don’t feel as uncomfortable when they sit on your conference room chairs.
To clean your felt pads, simply tie them up with a knot and wash them in warm water. Let them dry out before you use them again!
By following these simple steps, you will be able to effectively clean your conference room chairs without causing any damage to them. Remember to always follow the manufacturer’s instructions on how best to maintain your furniture for longevity!